Projects

Customized and built right

Industrial & Commercial Engineering Services in Prince George, BC

22 pieces, various configurations

coarse screen chute

20,000 lbs, 19' tall, 22' long, 10' wide,

Site transfer bins

9 pieces. Large bins are 8'x 6' x 5', small bins 4'x 4'x 4'

Mining distribution box

Concrete lined, 6' x 6' x 6'

Staircase with landing

3 piece aluminum bridge walkway sections

Site transport bins

Batch of 9 pieces, 2" thick lifting assemblies, built 100% in-house

Course screen chute

20,000 lbs, 19' tall, 22' long, 10' wide,

skid mounted 5000 gallon transfer tank

24' long, 10' wide, 8000 lbs, designed and built in house

Structural steel

Miscellaneous assortment

Course screen chute

20,000 lbs, 19' tall, 22' long, 10' wide,

Aluminum walkway bridge sections

Distribution box

Built from site measure of existing box while in operation, ceramic liner package

Distribution Units

Built from site measure of existing box while in operation, ceramic liner package

Unit for mine process water

Built from site measure of existing box while in operation, ceramic liner package

24’ plus 30’ bridge sections, 17,000 pounds of steel, site measured, designed, supplied and installed for minesite.

24’ plus 30’ bridge sections, 17,000 pounds of steel, site measured, designed, supplied and installed for minesite.

cable pole stands 3

63’ tall, 10” diameter pipe with T at top. Used to hold electrical cable overhead on minesite.

cable pole stands 2

63’ tall, 10” diameter pipe with T at top. Used to hold electrical cable overhead on minesite.

cable pole stands 1

63’ tall, 10” diameter pipe with T at top. Used to hold electrical cable overhead on minesite.

rush project for minesite. To be fastened to underside of existing bridge on site indoors. Shop drawing package by Fraser Custom Equipment. Installation by others. Dimensions of 17’ x 14’.

rush project for minesite. To be fastened to underside of existing bridge on site indoors. Shop drawing package by Fraser Custom Equipment. Installation by others. Dimensions of 17’ x 14’.

approximately 17,000 pounds of steel. 3/8 wall construction. 14’ wide, 7’ deep, 15’ tall when assembled. Shop drawing package by Fraser Custom Equipment

6’ diameter fan. replace fins on existing fan with new. 3D scan existing fan, gouge off top and bottom places, replace fins, weld solid.

Fraser Custom designed and fabricated this grizzly for a mine site. Built to withstand 3 foot diameter rock loading with 3” screen size. Shipping dimensions of 14’6” wide, 13’8” tall and 20’ long, weight of 24,000 pounds.

Fraser Custom designed and fabricated this grizzly for a mine site. Built to withstand 3 foot diameter rock loading with 3” screen size. Shipping dimensions of 14’6” wide, 13’8” tall and 20’ long, weight of 24,000 pounds.

Fraser Custom designed and fabricated this grizzly for a mine site. Built to withstand 3 foot diameter rock loading with 3” screen size. Shipping dimensions of 14’6” wide, 13’8” tall and 20’ long, weight of 24,000 pounds.

Designed, fabricated and installed by Fraser Custom. Dimensions of finished product dictated modular construction to be site welded.

a typical day in the shop

A material handling bin for mine site.

Stainless Cones

job specific weld procedures were developed, tested and approved for this job to limit distortion. these were held to 1/16” deflection tolerance and all welds LP tested by third party. Built from 3/16 and ¼” 316 stainless steel construction.

Stainless Froth Crowders

job specific weld procedures were developed, tested and approved for this job to limit distortion. these were held to 1/16” deflection tolerance and all welds LP tested by third party. Built from 3/16 and ¼” 316 stainless steel construction.

Stainless Froth Crowders

job specific weld procedures were developed, tested and approved for this job to limit distortion. these were held to 1/16” deflection tolerance and all welds LP tested by third party. Built from 3/16 and ¼” 316 stainless steel construction.

Structural Steel

1 of several loads totalling 100’s of thousands of pounds of structural steel produced over a summer for a sawmill in Saskatchewan.

Structural Steel

1 of several loads totalling 100’s of thousands of pounds of structural steel produced over a summer for a sawmill in Saskatchewan.

Structural Steel

Erecting our steel inside of an existing building for seismic support and to create a 2nd floor sunroom. This is a small part of the steel that went into this building.

2nd unit of transfer tanks built by Fraser Custom Equipment

Skid mounted transfer tanks

Red Chris Mine: Skid mounted tanks, designed and produced fully in house. In house AutoCAD for design, in house CNC plasma cutting table for misc. parts, in house plate rolling for shell plates, in house paint application.

Rock Chutes With Liners

Complete with blast and paint, liner package, including formed and rolled pieces up to 1.5” thick AR plate. Built one and they liked it so much they asked for another.

Galvanized Staircase

Ron Brent Park 40’ long, 8’ wide galvanized staircase. Complete with pickets, multiple landings, and a direction change, made to suit site conditions, for a commercial builder here in Prince George. Installed as 2 large sub assemblies on a hill side with limited access.

designed, engineered and fabricated by Fraser Custom equipment, these gear stands provide a shipping and storage base for half and quarter section of girth gears for a mine sites sag and ball mills. Picture shows 4 of 8 pieces.